2. Under the condition that the water pressure is not less than 0.02 mpa (0.2 kgf/cm2), after a period of use, if it is found that the water output decreases, or even the water heater turns off, the screen cover can be slightly unscrewed at the water outlet of the faucet to remove impurities, and generally it can be restored as before.
3. Don't use too much force to open and close the faucet, just turn it gently. Even traditional faucets do not need to be screwed to death. In particular, do not support or use the handle as a handrail.
4. The shower head metal hose of the bathtub faucet should be kept in a natural stretching state, and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
5. The ideal cleaning technique is to rinse the faucet with clean water, and then wipe all the water on the metal surface of the faucet with soft cotton cloth, because the water will form scale on the metal surface after volatilization. Wipe gently and do not rub vigorously. Wipe it with a wet sponge and soft leather to make the faucet bright.
6. It is better to use mild liquid glass cleaner, or acid free, non abrasive soft liquid and completely dissolved powder. Non abrasive solution polishing agent can remove the thick facial mask and deposits on the faucet. Do not use any abrasive cleaner, cloth or paper cloth, as well as any acid containing cleaner, polishing friction agent or rough cleaner.